Communities of Lantern Yard and Raveloes Influence on the Development

Communities of Lantern Yard and Raveloe's Influence on the Development of Silas Marner's Character Silas Marner, "The Weaver of Raveloe" was, in my opinion, greatly influenced by the two communities in which he spent his life. The first, Lantern Yarn was a religious community that is going through a period of industrialisation during the novel, whereas Raveloe, where we remain for the large part of the novel, has not yet felt the industrial revolution and is the countryside of community and society. It is ironic that the two communities were so different yet they both drove Silas to turn inward (though the influence of certain Raveloe citizens eventually made him turn outwards again). In George Eliot's novel, we learn a lot about community and we can see a clear definition of what this means. In Lantern Yard, the community shares its potent Christian beliefs while Raveloe habitants all share a love for social behaviour and share an understanding of a clear class system. While both groups of people (Lantern Yard and Raveloe) are very different, they both show us that a community is the people of an area who share their origins, beliefs and/or interests. In Lantern Yard, Silas was a highly regarded, prominent member of the community. He was well educated and it was in Lantern Yard that he started to turn away from the knowledge of medicinal herbs that his mother had taught him. In Lantern Yard, Silas was extremely trusting and open. We also see early on in the novel that Silas had a clear ability to love. A religious man, he found enjoyment in the debate of religious matters and he fell in love with a woman named Sarah. He was, however, betrayed by his best friend William Dane (Waif) and brought to a... ...harp contrasts with chapter twenty-one. Eliot also uses colours to create a more vivid image for the reader, one you can almost feel yourself being part of and while Lantern Yard is, to Eppie at least a "dark, ugly place" and "worse than the workhouse" Raveloe remains light, friendly and ""a pretty home"." In conclusion, Silas Marner's character was greatly influenced by the two communities in which he spent his life. Firstly, Lantern Yard, his original home, caused him to turn inward and forced him to enter into a downward spiral, something from which he was eventually lifted by the Raveloe community. While Raveloe did, at first allow him to carry on in isolation, the community eventually changed his character, and aided him in the path to self discovery as he subconsciously endeavoured to learn to trust again, learn to love again and how to be loved. Communities of Lantern Yard and Raveloe's Influence on the Development Communities of Lantern Yard and Raveloe's Influence on the Development of Silas Marner's Character Silas Marner, "The Weaver of Raveloe" was, in my opinion, greatly influenced by the two communities in which he spent his life. The first, Lantern Yarn was a religious community that is going through a period of industrialisation during the novel, whereas Raveloe, where we remain for the large part of the novel, has not yet felt the industrial revolution and is the countryside of community and society. It is ironic that the two communities were so different yet they both drove Silas to turn inward (though the influence of certain Raveloe citizens eventually made him turn outwards again). In George Eliot's novel, we learn a lot about community and we can see a clear definition of what this means. In Lantern Yard, the community shares its potent Christian beliefs while Raveloe habitants all share a love for social behaviour and share an understanding of a clear class system. While both groups of people (Lantern Yard and Raveloe) are very different, they both show us that a community is the people of an area who share their origins, beliefs and/or interests. In Lantern Yard, Silas was a highly regarded, prominent member of the community. He was well educated and it was in Lantern Yard that he started to turn away from the knowledge of medicinal herbs that his mother had taught him. In Lantern Yard, Silas was extremely trusting and open. We also see early on in the novel that Silas had a clear ability to love. A religious man, he found enjoyment in the debate of religious matters and he fell in love with a woman named Sarah. He was, however, betrayed by his best friend William Dane (Waif) and brought to a... ...harp contrasts with chapter twenty-one. Eliot also uses colours to create a more vivid image for the reader, one you can almost feel yourself being part of and while Lantern Yard is, to Eppie at least a "dark, ugly place" and "worse than the workhouse" Raveloe remains light, friendly and ""a pretty home"." In conclusion, Silas Marner's character was greatly influenced by the two communities in which he spent his life. Firstly, Lantern Yard, his original home, caused him to turn inward and forced him to enter into a downward spiral, something from which he was eventually lifted by the Raveloe community. While Raveloe did, at first allow him to carry on in isolation, the community eventually changed his character, and aided him in the path to self discovery as he subconsciously endeavoured to learn to trust again, learn to love again and how to be loved.

Childhood Obesity :: Obesity in Children

Over the past thirty years, childhood obesity has doubled among young children and adolescents in the United States (National Institute of Health, 2014). It is becoming a great concern for parents as children are getting heavier and heavier (Eberstadt, 2013). Fast food restaurants, among other reasons, can be to blame for this. Obesity, which should be identified before any problems can occur, has many causes which has lead it to become an epidemic in the United States, however there are several preventions and treatments that parents can execute to help their children live healthy lives. Nevertheless, this requires parents to educate themselves about obesity. Obesity is defined as the excessive accumulation of body fat. One’s total body weight would be more than 25 percent fat in boys and more than 32 percent in girls if he or she were to become obese. A trained technician may obtain skin fold measures by triceps alone, triceps and sub scapular, triceps and calf, and calf alone. In triceps and calf, a sum of skin fold of 10-25 mm. is considered optimal in boys, and 16-30 mm. in girls (Office of Educational Research and Improvement, U.S. Department of Education, 2014). Besides the skin fold test, there are other ways to measure excess fat. A measurement called Percentile of Body Mass Index, or BMI, is used to identify overweight and obese children. If a child is in the 85th percentile, he or she is at risk level to becoming obese. For adults, this means that one is overweight. If a child reaches the 95th percentile, which corresponds to a BMI of 30, obesity in adults, than the child is at a severe level. The 95th percentile identifies children that are very likely to have obesity persist in adulthood, and is associated with elevated blood pressure and lipids in older adolescents, and an increased risk of diseases. The 95th percentile is also a sign that the child needs aggressive treatment (American Obesity Association, 2014). Obesity among children is increasing on a day-to-day basis. Between 5-25 percent of children and teens in the United States are obese: about 15.5 percent of adolescents (age 12-19) and 15.3 percent of children (ages 6-11). Of children, 7 percent were obese from 1976-1980, 11 percent from 1988-1994, and most recently 15.3 percent from 1999-2000. Of adolescents, 5 percent were obese from 1976-1980, 11 percent from 1988-1994, and an outstanding 18.

A Biographical Analysis of The Rime of the Ancient Mariner Essays

A Biographical Analysis of The Rime of the Ancient Mariner â€Å"The Rime of the Ancient Mariner,† by Samuel Taylor Coleridge, is a somewhat lengthy poem concerning the paranormal activities of a sea mariner and his crew. The work was constructed to be the beginning piece in Lyrical Ballads, a two-volume set written by William Wordsworth and Coleridge. Wordsworth intended to, in his volume, make the ordinary seem extraordinary, while Coleridge aimed to make the extraordinary ordinary. â€Å"The Rime† was first published in 1798. Despite the current popularity of the piece, it was harshly criticized upon being first published. One of â€Å"The Rime’s† toughest opponents was Wordsworth himself, who claimed that the poem had â€Å"neither characterization nor proper agency nor skill in the handling of imagery† (Fry, 12). Wordsworth even bluntly described the piece as being in the wrong overall meter (Fry, 12). Because of these presumed flaws, â€Å"The Rime† was edited into several subsequent editions, being released in 1800, 1802, 1805, 1817, and 1834. When a reader examines â€Å"the Rime,† the piece first appears to be merely that of an archaic ghost story. Throughout the years though, many have analyzed the poem from various angles of interpretation. Some of the methods used to decipher â€Å"The Rime† have included reader-response, Marxist, new historicism, psychoanalytic, and even deconstruction analysis. While each of these alternatives provides an individualistic prospective on the poem, they are all somewhat different, and can even be objective at times depending on the reader in question. While â€Å"The Rime† may have been constructed to address slavery, the economy, or even morality, it can also be greatly appreciated when looke... ...ations of his work (Fry, 8). A short time later, Coleridge died, but only after some of the most peaceful years of his life. â€Å"The Rime† is a supernaturally based poem, which is full of imaginative symbolism and imagery. Despite its numerous revisions, it is still a defining piece of literature from the Romantic period. While several approaches can be taken to investigate the poem, a biographical analysis provides an insightful look into the life of the author that created the work. In â€Å"The Rime,† Coleridge has the Mariner facing many of the same obstacles that he faced throughout his life, including death, isolation, constant wandering, and a final search for salvation. Works Cited Coleridge, Samuel. â€Å"The Rime of the Ancient Mariner.† Fry 26-75. Fry, Paul, ed. The Rime of the Ancient Mariner. Boston and New York: Bedford / St. Martin’s, 1999.

Traffic Congestion Alert System Using Gsm

Lens Antenna an antenna whose directivity pattern is a result of the difference between the phase velocity of propagation of an electromagnetic wave in air and that in the lens material. Lens antennas are used in radar and metering equipment that operates in the centimeter wavelength range. A lens antenna consists of a lens proper and of a feed. The shape of the lens depends on the refractive index n (the ratio of the phase velocity of propagation of a radio wave in a vacuum to that in the lens). A decelerating lens antenna, as in optics, is one for which n > 1.An accelerating lens antenna (without an optical analogy) is one for which n < 1. The feed is usually a horn antenna that generates a spherical wave front or an antenna array that produces a cylindrical wave front. Decelerating lens antennas are made of high-quality low-loss homogeneous dielectrics (polystyrene, fluoroplastics) or synthetic dielectrics (systems of variously shaped metallic particles suspended in air or in a ho mogeneous dielectric with a relative dielectric constant approaching unity).The refractive index can change within wide limits with extremely low losses. Accelerating lens antennas are made of shaped metal sheets. There is no analogy in optics. The principle of operation derives from the fact that the phase velocity of an electromagnetic wave propagating between parallel metal sheets depends on the distance between them if the electric field vector is parallel to the sheets. In such a case the phase velocity is greater than the speed of light, and the refractive index is less than unity.Zoning the surfaces of a lens antenna reduces its weight and dimensions. The shape and height in profile of the individual zones are chosen such that the electromagnetic waves refracted by adjacent zones leave the lens with a phase shift of 360Â °. The field at the aperture remains cophasal. With aplanatic and Luneberg lens antennas it is possible to control the directivity pattern virtually without distortion. Traffic Congestion Alert System Using Gsm Lens Antenna an antenna whose directivity pattern is a result of the difference between the phase velocity of propagation of an electromagnetic wave in air and that in the lens material. Lens antennas are used in radar and metering equipment that operates in the centimeter wavelength range. A lens antenna consists of a lens proper and of a feed. The shape of the lens depends on the refractive index n (the ratio of the phase velocity of propagation of a radio wave in a vacuum to that in the lens). A decelerating lens antenna, as in optics, is one for which n > 1.An accelerating lens antenna (without an optical analogy) is one for which n < 1. The feed is usually a horn antenna that generates a spherical wave front or an antenna array that produces a cylindrical wave front. Decelerating lens antennas are made of high-quality low-loss homogeneous dielectrics (polystyrene, fluoroplastics) or synthetic dielectrics (systems of variously shaped metallic particles suspended in air or in a ho mogeneous dielectric with a relative dielectric constant approaching unity).The refractive index can change within wide limits with extremely low losses. Accelerating lens antennas are made of shaped metal sheets. There is no analogy in optics. The principle of operation derives from the fact that the phase velocity of an electromagnetic wave propagating between parallel metal sheets depends on the distance between them if the electric field vector is parallel to the sheets. In such a case the phase velocity is greater than the speed of light, and the refractive index is less than unity.Zoning the surfaces of a lens antenna reduces its weight and dimensions. The shape and height in profile of the individual zones are chosen such that the electromagnetic waves refracted by adjacent zones leave the lens with a phase shift of 360Â °. The field at the aperture remains cophasal. With aplanatic and Luneberg lens antennas it is possible to control the directivity pattern virtually without distortion.

Bottlenecks in a Process Essay

Bottleneck can slow down production and diminish efficiency. According to Li, Chang, & Ni, (2009) â€Å"quick and correct identification of the bottleneck locations can lead to an improvement in the operation management of utilizing finite manufacturing resources, increasing the system throughput, and minimizing the total cost of production† (p.1). The operation of preparing dinner will be analysis to find where the process has a bottleneck and how to eliminate or reduce the bottleneck time. Identifying the Bottleneck in the Process When preparing dinner marinating the meat has proven to be a bottleneck for the process. For example steak can require up to 24 hours to be marinated, holding production for 24 hours is a problem. Choosing a different cut of meat can reduce the time and can require as little as one hour for the meat to marinate. In the production of preparing dinner an hour is still a bottleneck in the process. Considering it can be one hour to marinate the meat, then twenty minutes to cook while side dishes such as rice will only take about thirty minutes to cook the two process can not be run parallel on product will be undercook while the other overcook. Data Collection Reviewing the data collected over the last four week in preparing dinner the cycle of the process is longer when meat requiring longer marinating time is used in the preparation of dinner. During week two on the second day the preparation of dinner took sixty minutes. The marinating of the meat prevented the process of the side dish to begin because it would cause the meal to be overcooked. The key is to schedule the process capacity carefully to ensure the bottleneck is eliminate or reduce. One step taken to reduce the bottleneck time to make long-term decision regarding the process and have the meat marinates overnight. Avoiding last minute decision increases the efficiently in the process time. Conclusion According to Kamauff, (2010) †bottleneck-point in a process where the flow slows and work-in-process accumulates because of a difference between capacity of one process and the demand of the next†(p.32). Identifying the bottleneck can help plan the process more efficient to reduce the waste of resource such as time. Preparing dinner can be time consuming but with long-term planning and decision making improvements can be made to the process to reduce time. The extra time can be utilize do spend more time with the family reviewing the day.

Punishments in Primitive Soceity Essay

Introduction: The most usual criteria for punishment in primitive societies is the principle of â€Å"Eye for an eye†. According to this principle if a person has taken the eye of another the chief orders that the eye of the criminal should be taken.Blood for blood is the ancient principle of retribution in primitive societies. Thus punishment is based on retributive principle. This is so since most of the tribal people believe that crime is a violation of divine system or rules. Hence it is believed that the criminal is evil and should be given suitable punishment so that he may become free from evil.The evil souls must be punished. Besides retribution, another basis for punishment is compensation of the loss. Punishment in the form of fine is usually based on this principle. A fine is imposed since it compensates the loss.But the most important principle in the primitive system of punishment is the principle of collective responsibility.According to this principle punishment is not necessarily awarded to the individual who has committed the crime but his family, clan and local group may also be punished. For example, punishment of death is given for a murder, but this punishment may not be awarded to him who has murdered.In his place some other member of his family, group or clan may be killed since the group is collectively responsible for the criminal act of each member. CHARACTERISTICS OF PRIMITIVE LAWS It is a part of natural and supernatural principles. It is based on kinship types. It is originated from the moral and ethical notions and public opinion. In primitive law there is no difference between civil law and criminal law. Primitive law doesn’t distinguishes between crimes and torts, public and private issues. It gives importance to sin and supernatural punishments. In here kinship group looks after law, therefore, there is collective responsibility for protecting the law. Kinds of Evidence (a) Oath. The offender has to take an oath and then he is asked to state whether he has committed the offence or not. It is generally believed that, if the offender tells a lie, he falls a prey to the supernatural anger for taking a false oath. (b) Ordeal. Sometimes the persons accused are put to torture in primitive societies before the declaration of judgment in criminal cases. If the accused persons escape without injury, they are acquitted as they are supposed to be not guilty. Kinds of Punishment 1. Different types of punishment are prevalent in different primitive societies. While in some societies compensation and social extermination are the more usual punishments, in other societies different types of physical injuries are inflicted as punishment. Similarly, in some societies fines are imposed and community feast is demanded to wipe off the crime. 2. Capital sentence is generally given in a case of homicide; but sometimes the death penalty is given to one of his family members or to one of his kins instead of inflicting it up to the person who has actually committed homicide. 3. They-believe that it is not the individual who is regarded to have been wronged but the whole kin-group to which he belonged and his kin-group, therefore avenges itself on the kin- group of the accused and not necessarily on the accused himself. 4. In some other societies the criminal is publicly insulted by blackening his face and carrying him through the entire village seated on a donkey. In America, in a tribe an unfaithful wife is given the punishment of death by drowning in water. In an Uganda tribe there is provision of jail for the criminal. The criminal, however, can be set free for a night. 5. If the crime is very serious the criminal is fixed to a pole till he dies. Murder is usually punished by capital punishment but most of the tribes do not have the provision for hanging till death. The provision for jail, however, is very exceptional. Usually, one does not find prison houses in tribal societies. 6. The misbehavior done to an ordinary individual is lightly punished, when the same misbehavior done to a chieftain is punished severely. For example, adultery with the wife of a king or chieftain is a capital crime and punished with death whereas adultery with some ordinary individual is not punished so severely. 7. The punishment of imposing a fine is not found among the punishments for crimes in primitive societies. Where fines are charged in a primitive society, they are paid by way of compensation to the aggrieved party. 8. The accused, very often, has to give a feast to the whole village in compensation for his crime. Even in case where fines are paid by way of compensation for the wrong done, attention is paid to the person who has done the wrong as well as to the person who has been wronged, if a person of a low standard offends a person of a high status, the find imposed is very heavy. But, if a person of a high status offends an ordinary person, the amount of compensation is very small.

Differences Between Female Japanese and English Mill Workers Essay

Despite the fact that Japan and England had many similarities with female mill workers, they still had a few differences. They basically had young children and women working in big dangerous factories making thread or in mines. So how were their experiences different? Female Japanese workers had to work more, they got paid less, and they accepted the role that their society gave them. Compared to English women mill workers, Japanese women worked more. English female workers only worked about 74 hours a week and Japanese female workers worker 91 hours a week (Document 5). This was because the Japanese workers worked longer each day, had less holidays, and worked on weekends (Document 8). English female workers had more breaks, worked shorter hours each day, and did not work on weekends. This is a big difference between female English and Japanese mill workers. Even though in both England and Japan women got pair less than men, Japanese women got paid even less than English women. This is a reason why they had so many workers. Since they paid them less they would be able to hire more workers and increase their production rate. Even though they got paid less, it was for the same reason. Why would they want to pay women less? They paid women less because the women needed money and they would accept any amount given to them (Document 8). Japan and England have different ways they treat women and because of that the Japanese women accepted almost everything they went through in the mills. In Japan the women were treated a little less fairly. Japanese women were more willing to accept their role in society because they couldn’t do much about it (Document 8).This is the reason that female Japanese mill workers got low pay and worked more hours. In their society the men were respected more and had more freedom. Female Japanese workers had to work more, they got paid less, and they accepted the role that their society gave them. Although their situations were almost the same, the different cultures had a big part to do with the way women were treated while working. England treated their women with more respect while Japan just thought that women needed to support their families by working all the time. This is important because it was a way for people to discriminate against women and make them work at bad places with low pay and many working hours.